Posts Tagged ‘disposal’

Household In-sinkerator

If an in-sink-erator is already installed in your home and it goes bad, don’t panic it is very easy to install a new one right in its place. The disposal unit is secured by a twist lock that ensures proper seal and mounting. Unplug the disposal to be changed from the wall outlet. Disconnect the drain pipe from the waste plumbing, use a bucket in this section to catch any residual stuff that may come out of the piping. Then “twist off” the old in-sink-erator and “twist on” the new one. Make sure that you take the knock out plug out before installing the new disposer. Connect the disassembled plumbing that was taken off and make sure that the connections are a 1/4 turn past hand tight. After the unit is mounted solid, plug in the unit back into the wall socket with the pig tail. To check the unit properly run the water into the unit and turn on for a short burst to make sure that all connectivity is well put. You are all done….Great job

Share

Tags: , , , ,

Rss Feed Tweeter button Facebook button Technorati button Reddit button Myspace button Linkedin button Webonews button Delicious button Digg button Stumbleupon button Newsvine button
Content Protected Using Blog Protector By: PcDrome.